~Uniflex UNIQUARTZ Taupe - Floor Wall Covering Ready-To-Use, 5 Gallon (1) -

SO-SCI-UNIQ-TAUPE
Stock : 0

UNIQUARTZ is a Ready-to-use single-component coating based on polymer, water and granite for technical and decorative coating of floors and walls indoors and outdoors. APPLICATIONS Exterior: Pedestrian paths, Car access, Parking, Garage ramps, Courtyards, Landscaping, Pool surrounds and Beaches, Low walls, Fences, Terraces and Balconies, Steps, Porches and House Foundations, Renovation, Stadium stands, Playgrounds, Disabled access, etc. Interior: Halls, Corridors, Cellars, Building levels, Stairwells, Corridors, Warehouses, Toilets, Offices, Activity premises, Shops, etc. New Constructions or Renovations: For individuals, Condominiums, Hotels, Businesses, Traders, Public spaces, etc. ADVANTAGES • Ready-to-use single-component product • Exceptional adhesion, does not require primer • Drying: approximately 1 hour depending on application conditions • More than 20 shades available on color chart and possibility of tinting on request Abrasion resistant • Resistant to freezing and thawing • UV resistant (does not yellow) • Resistant to salt, oil, gasoline • Non-slip • Elasticity 100% • Subsequent connections not visible • Ecological product without odor (very low VOC rate) • Application between 2 and 30°C • Shelf life of the product in pot: +10 years

Additional information :

TECHNICAL DATA Packaging: 25 KG PAIL or 18.8L (5 US GALLON) APPLICATION: ±2.3 kg/m2 for 3mm thickness applied in 2 layers, i.e. approximately 11m2 per pot USE: Outdoors and indoors on horizontal and vertical supports. For perfect homogeneity, the product must be mixed with the appropriate tool approximately 1 minute before use. The unconsumed product can be kept for 10 years in its original hermetically sealed pot and stored in a dry place at a temperature between 5 and 30 °C. SUPPORTS: This product can be applied to all concrete, cement, tile, wood, metal supports, etc. The support must be sound and completely free of any dirt; dust, oil, grease, glue, etc. A damaged support can be repaired beforehand with a polymer-based concrete. A maximum humidity level of 30% is tolerated on concrete supports.

Downloadable Documents :